# Coffee machine dimensions: will it fit under your cupboards

Source: https://beanandcrema.co.uk/blog/coffee-machine-dimensions
Published: 2026-10-12
Publisher: Bean and Crema

**In short:** Most bean-to-cup machines are about 24 to 31 cm wide, 37 to 47 cm deep and 33 to 40 cm tall, while slim models are around 20 cm wide. Manual espresso machines with grinders are typically 28 to 32 cm wide and around 35 to 41 cm tall. UK wall cupboards usually leave roughly 45 to 50 cm above the worktop, so most machines fit, but you need extra room to open the bean hopper and lift out the water tank.

Coffee machines take up more room than people expect, and the height under wall cupboards is often the deciding factor. A machine that fits on paper may still be awkward if you cannot open the hopper lid or slide the tank out. This guide gives typical dimensions from real Amazon UK listings for popular machines, then explains the clearances to allow. Listing dimensions are sometimes entered inconsistently, so always confirm on the maker's spec sheet before buying.

## Typical sizes by machine

The figures below are taken from listing data, shown as depth x width x height in centimetres. They give a sense of the range.

| Machine | Type | Dimensions |
| --- | --- | --- |
| Melitta Solo | Slim bean-to-cup | 45.5 x 20 x 32.5 |
| De'Longhi Magnifica Start | Bean-to-cup | 44 x 24 x 35 |
| De'Longhi Rivelia | Bean-to-cup, two hoppers | 43 x 24.5 x 38.5 |
| Jura ENA 8 | Compact bean-to-cup | 44.5 x 27.1 x 32.3 |
| Philips 5400 LatteGo | Bean-to-cup | 37.2 x 24.6 x 43.3 |
| Siemens EQ700 | Bean-to-cup | 46.7 x 30.9 x 38 |
| Sage Barista Express | Espresso with grinder | 40.4 x 31.8 x 35.1 |
| Sage Barista Express Impress | Espresso with grinder | 33 x 38 x 41 |
| De'Longhi La Specialista Arte | Espresso with grinder | 36.5 x 27.5 x 40 |
| Ninja Luxe Premier | Espresso with grinder | 34.4 x 35.5 x 37.2 |
| De'Longhi Classic EM450 | Manual espresso | 28.3 x 22.6 x 31 |

Example dimensions from listings (D x W x H, cm)

## Height and wall cupboards

Height is usually the tightest measurement. Measure from your worktop to the underside of the wall cupboards, not to the cupboard doors. Then add room for anything that opens upwards. On bean-to-cup machines, the bean hopper lid sits on top and needs space to lift. On espresso machines with grinders, the hopper sits on top and you need room to remove it or pour beans in.

Many machines have a water tank that lifts out from the top or the back. If it lifts out upwards, you need clearance above the tank. If it slides out from the front or side, height matters less but you need side or front space. Sliding the machine forward each time works, but it gets tedious.

## Width and depth

Most bean-to-cup machines sit between about 24 and 31 cm wide. Slim models such as the Melitta Solo and Purista are around 20 cm wide, which suits narrow spaces. Our [small bean-to-cup guide](https://beanandcrema.co.uk/best/best-small-bean-to-cup-coffee-machine) lists compact options.

Depth is often 37 to 47 cm, which is close to the depth of a standard worktop. Leave a little room behind for cables and air. Manual espresso machines are often shallower but wider, especially with a separate grinder beside them. Remember the portafilter handle sticks out at the front, and you need room to knock out pucks.

## Clearance checklist

- Measure worktop to underside of wall cupboard.
- Add space for the hopper lid or hopper removal.
- Check how the water tank comes out: top, front or side.
- Allow room at the side for opening the brew unit door on bean-to-cup machines.
- Allow space in front for cups, milk jugs and the portafilter.
- Keep the machine near a socket and away from the sink edge.

## Weight and moving the machine

Weights vary a lot. The Sage Barista Express is listed at 12.8 kg and the Ninja Luxe Premier at 16.3 kg, while many bean-to-cup machines sit around 7 to 10 kg. If you need to slide the machine out from under cupboards to fill it, a lighter machine or one with a front-loading tank is much easier. Rubber feet help protect worktops but make sliding harder.

For heavy machines, place them where you can fill and clean without moving them. Our [what do you need for an espresso machine](https://beanandcrema.co.uk/blog/what-do-you-need-for-an-espresso-machine) article covers the extra space accessories take.

[See compact bean-to-cup machines](https://beanandcrema.co.uk/best/best-small-bean-to-cup-coffee-machine)

## Frequently asked questions

**What is the smallest bean-to-cup coffee machine?** Slim models around 20 cm wide, such as Melitta's Solo and Purista, are among the narrowest. See our [small bean-to-cup guide](https://beanandcrema.co.uk/best/best-small-bean-to-cup-coffee-machine).

**What are the Sage Barista Express dimensions?** The listing gives 40.4 cm deep, 31.8 cm wide and 35.1 cm high. Allow extra height for the bean hopper.

**Will a coffee machine fit under standard kitchen cupboards?** Most do, but check the clearance needed to open the hopper and remove the tank.

**Do I need space for a separate grinder?** With a manual machine without a grinder, yes. Allow roughly 12 to 20 cm extra width for a typical electric grinder.

## Buying guides on this topic

- https://beanandcrema.co.uk/best/best-small-bean-to-cup-coffee-machine
- https://beanandcrema.co.uk/best/best-bean-to-cup-coffee-machine
- https://beanandcrema.co.uk/best/best-espresso-machine-with-grinder